
The PATI is a highly integrated I/O Board in PC/104-Plus form factor. Build around the MPC555 Motorola PowerPCTM Processor and the PLX9056 PCI Bridge it brings the superb MPC555 peripherals to a standard PCI Interface.
With the possibilities for firmware update over the PCI bus, parameter passing via the on-board SDRAM, allowing the PATI to access the host memory via PCI busmaster access and various configurations options it is well suited for fast prototyping application.
A stand-alone mode allows the PATI to work without the host. Application developed and tested in a host environment can be executed on the PATI in the stand-alone mode without any code modification.
The MPC555 peripherals are available on 2 standard 50 pin 2.54 mm header which offers easy connections. It features 8 differential 10bit Analog/Digital channels, 32bit TPU channels, 2 serial interfaces and 2 CAN interfaces.
Specification:
| Reference | Description |
|---|---|
| CPU | MPC555 / 40MHz |
| PCI | 32Bit / 33MHz Master/Slave Target only |
| RAM | 16MByte SDRAM (max. physical address range of MPC555) |
| Flash | up to 8MByte |
| Analog | 8 x Input 25kHz sampling rate (each) 10kHz bandwidth |
| TPU | 32 Channel |
| CAN | 2 x CAN 2.0B |
| Power | 5V only (Switcher for 3.3V onboard) |
Ordering Information:
| Reference | Description |
|---|---|
| PATI-1 | PC/104-Plus module with 2x CAN, 8x 10-bit ADC channels, 32 TPU channels, 2x RS232, 16Mb SDRAM and 8MB Flash. (loaded with special Mathworks Firmware) |
| PATI-2 | PC/104-Plus module with 2x CAN, 8x 10-bit ADC channels, 32 TPU channels, 2x RS232, 16Mb SDRAM and 8MB Flash. (loaded with standard MPL Firmware) |
| PATI-Cx | Customer specific versions, please contact MPL for details. |
Copyright © 1997-2012 MPI Distribution AG, a member of the HT Holding AG.
Information contained in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.