Digital I/O + Counter/Timers

 

GPIO-MM FPGA-Based Counter/Timer + Digital I/O PC/104 Module

GPIO-MM / MM-12 

GPIO-MM FPGA-Based Counter/Timer + Digital I/O PC/104 Module:

Initial GPIO-MM release provides 48 programmable direction digital I/O signals, 16 fixed direction I/O signals, 10 16-bit counter / timers and the ability to reconfigure in the field. GPIO-MM is based on a Xilinx Spartan II FPGA. Use of an FPGA to implement the digital I/O logic allows the GPIO-MM hardware to be reprogrammed, in the field if necessary, to serve multiple PC/104 I/O applications with different digital I/O requirements.Universal Driver software for Linux, Windows 98/2000/XP/CE.NET, DOS, QNX, and VxWorks.  Industrial temperature range of -40 to +85°C.

 

Datasheet 

Manual MM

Manual MM-12

PGA-based Digital I/O Applications

 

GPIO-MM-21

Reconfigurable 96-line Digital I/O PC/104 Module:96 programmable digital I/O lines based on 8255 cores, 3 pin headers for a total of 100 I/O pins, based on a Xilinx Spartan II RAM-based FPGA for field reconfigurability FPGA personality display for easy identification, -40 to +85°C operation.

Datasheet 

Manual

 

Counter/Timer + Digital I/O PC/104 Module

ONYX-MM

Programmable Counter/Timer, Interrupt, and Digital I/O PC/104 Module:

48 digital I/O lines, 3 16-bit counter/timers, 3 PC/104 bus interrupt lines, On-board 4MHz clock oscillator, Programmable counter and interrupt sources, Can generate bus interrupts at programmable intervals, Software and technical manual included.

Datasheet  

Manual

 

ONYX-MM-DIO

48-line low-cost digital I/O Extended Temperature: 

48 digital I/O lines, 10KΩ pull-up resistors on each line, All lines power up in input mode, Dual 50-pin I/O headers, Low cost, Software and technical manual included.

Datasheet  

Manual

 

IEI

DIO's, Counter /Timer, Thermocouple, CAN Selection guide...

PM-3001

DIO / CAN Module: Eight isolated digital Input lines (0-50 VDC, 10 kHz speed) , eight isolated digital Output lines (0-30 VDC/ 200 mA sink ciurrent, 10 kHz speed). 2 isolated CAN-Channel.

Datasheet  

 

PM-3002

DIO /Timer / CAN Module: 16 isolated digital Input lines (0-50 VDC, 10 kHz speed) ,16 isolated digital Output lines (0-30 VDC/ 200 mA sink ciurrent, 10 kHz speed). Counter Timer (4 x 16 bit). 2 isolated CAN-Channel.

Datasheet
 

 

PM-3003

DIO / Thermocuople Module: Eight isolated digital Input lines (0-50 VDC, 10 kHz speed) , eight isolated digital Output lines (0-30 VDC/ 200 mA sink ciurrent, 10 kHz speed). 2 Analog Inputs for Thermocouple JKTE type.

Datasheet

PM-3004

DIO / CAN/ Thermocuople Module: Eight isolated digital Input lines (0-50 VDC, 10 kHz speed) , eight isolated digital Output lines (0-30 VDC/ 200 mA sink ciurrent, 10 kHz speed). 2 isolated CAN-Channel. 2 Analog Inputs for Thermocouple JKTE type.

Datasheet


Copyright © 1997-2012 MPI Distribution AG, a member of the HT Holding AG.
Information contained in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.