Gigabit Ethernet Switch
5 Port Manageable GigaBit Ethernet Switch
The MAGBES-Family consists of 6 different manageable Gigabit Ethernet Switch models. The boards are PC/104 sized and offered as stand-alone, PC/104 stacked and special PIP built-in mechanical versions. They are available with different port configurations, either with 5 copper ports, or with 3 copper and 2 SFP optical transceiver ports.
Small form-factor pluggable (SFP) transceivers are available with a variety of different transmitter and receiver types. It allows the users to select the appropriate transceiver for each link to provide the required fiber optical interface.
![[MAGBES]](files/ImageRTEmagicC_8d50ebf9be.jpg.jpg)
As managed switch the product gives access to various switch settings to configure features like: Quality of Service, VLAN, Rapid Spanning Tree, etc.. To adjust these switch settings, MPL provides a easy to use web interface. (This product includessoftware developed by egnite Sotware GmbH and its contributors).<small></small>
MAGBES Specialities
- 5 port Gigabit Ethernet switch
- Fully manageable through web interface
- Copper and Fiber optic versions
- Stand alone and PC/104 stacked versions
- Low power & fanless operation
- Extended temperature option -40°C up to +85°C
Technical Features
| Board Key Data | ||
|---|---|---|
Ethernet Switch | 5-port manageable Gigabit Switch | lookup engine support up to 1024 MAC entries with automatic learning, aging |
Copper Ports | on RJ45 and 2.54mm header | supports auto crossover, polarity correction |
Fiber Ports | over standard SFP transceivers | supports Single and Multimode data rate up to 1 GBit |
Status LEDs | 2 LEDs for each copper port | Link/Activity and Speed |
| Physical/Power | ||
|---|---|---|
Size (length x width x height) | 90.2 x 95.9 x 13.8 mm | PC/104 size (versions -xS and -xP) |
Weight | 100 g / 0.22 lbs | fully equipped MAGBES-1S |
Power | +5 VDC ± 5% | input over 3-pin power connector |
Power consumption | Typically 3.5 W | 5 x 100Mbit copper links |
Temperature range | -20°C up to 60°C | optional -40°C up to +85°C |
Humidity | 5% - 95% non condensing | optional bonding & coating available |
| Management Software | ||
|---|---|---|
|
MAGBES Versions
| Product Number | Mechanical Version | Ethernet Ports Configuration | ||
|---|---|---|---|---|
| Copper on RJ45 | SFP for Fiber optic | Copper on 2.54mm header | ||
MAGBES-1S | Stand alone | 4 |
| 1 |
MAGBES-2S | Stand alone | 2 | 2 | 1 |
MAGBES-1P | PC/104 stacked | 4 |
| 1 |
MAGBES-2P | PC/104 stacked | 2 | 2 | 1 |
MAGBES-1M | PIP built-in | 4 |
| 1 |
MAGBES-2M | PIP built-in | 2 | 2 | 1 |
Pressebericht:
Spiderlan MPL
.jpg)
The SPIDERLAN-Family consists of universal high performance, compact and robust Ethernet Switch modules for industrial use. With a single PC/104-Plus module your system can be expanded with up to 2 ethernet controllers, each combined with a 5 port ethernet switch. So the board comes with up to eight fully independent operating external 10/100BASE-TX ports, available on RJ45 connectors. Each switch automatically determines and remembers where an Ethernet device is located and routes packets only to the appropriate port. This minimizes network loading, eliminates collisions and enables true deterministic communications over Ethernet. The SPIDERLAN is available as compact single PC/104-Plus module or as expandable version for front panel assemblies!
LAN104 specialities Up to 2 Fast Ethernet controllers on a single PC/104- Plus board Supports IEEE 802.3u autonegotiation Drivers for all major OS (AMD PCnetTM compatible) 3 different interface options: RJ45, 2.54 mm header, MII connector Allowing fibre optic 100Base-FX interface connection Status LED's onboard Runs with 5V input power only.
| Product Number * | Number of Ethernet and Switch controller | RJ45 Ports on PC/104-Plus Board | RJ45 Ports on Expansion Board |
|---|---|---|---|
SPIDERLAN-1P | 1 | 4 (on one switch) | - |
SPIDERLAN-1E | 1 | - | 4 (on one switch) |
SPIDERLAN-2P | 2 | 8 (two switches) | - |
SPIDERLAN-2E | 2 | - | 8 (two switches) |
Triple Gigabit Ethernet Controller
The TRIGET-Family consists of highly integrated, flexible, and robust PC/104-Plus compliant Ethernet modules for industrial use. With a single PC/104-Plus module a system can be expanded with up to three Gigabit Ethernet controllers! Through the use of a PCI to PCI bridge the TRIGET requires only one slot on a PC/104-plus stack. Therefore the stack still can be expanded by up to 3 other PC/104-Plus cards.
TRIGET Specialities
- Up to three Gigabit Ethernet controllers
- Only one PC/104-plus Slot is used
- Status LEDs on board
- Ethernet over RJ45 or 2mm lockable headers
- 33MHz/66MHz PCI operation
- Single 5V Power Supply
- 5V tolerant 3.3V PCI signaling
TRIGET Versions
| Reference | Function |
|---|---|
TRIGET-3H | 3 Gigabit Ethernet controller on standard PC/104-Plus module. |
TRIGET-3S | 3 Gigabit Ethernet controller on standard PC/104-Plus module. |
TRIGET-3M | 3 Gigabit Ethernet controller on PIP build-in PC/104-Plus based module. |
TRIGET-3HKIT | Cable and connector kit for TRIGET-3H. |
TRIGET-Cx | Custom specific version with 1-3 Gigabit Ethernet controller and required Ethernet interfaces. |
EPSILON, 8-Port Gigabit Ethernet Switch, PC/104 Form Factor
Managed 8-Port Gigabit Ethernet Switch with wide voltage input and serial management port.
Epsilon is a managed Layer 2+ Ethernet switch module offering eight 10/100/1000Mbps copper twisted pair ports on a PC/104 form-factor board.
Epsilon can be used standalone, without any connection to a single board computer, or in conjunction with a host CPU. The module's built-in microcontroller handles configuration and management. On-board memory holds dual application images, boot code, MAC addresses, and other parameters, and can also be used for program execution.
An RS-232 serial port enables communication between the module's on-board management microcontroller and a host processor for out-of-band management. Epsilon's built-in microcontroller is also accessible via a web management interface over one of the Ethernet ports. This port is then shared for simultaneous web management and normal usage.
Input power can be provided through the built-in, wide-range +7-36VDC power supply, enabling operation using industrial power sources. Alternatively, Epsilon can be powered from a +5VDC source.
To support the temperature extremes of fixed and mobile applications in both indoor and outdoor environments, the module supports fanless operation over -40°C to +85°C.
Managed Ethernet Switch | |
Switch Type | 8-port, Layer 2+ switch |
Number of Ports | 8 10/100/1000Mbps Ethernet ports |
On-board Memory | 2MB flash for boot and application code |
Frame Buffer | 176KB on-board frame buffer |
DSCP | DSCP remarking for both IPv4 and IPv6 frames |
Rapid Spanning Tree Protocol | IEEE 802.1W |
Serial Port | 1 RS-232 port for host interface |
Indicator LEDs | 16 status LEDs, two per port |
Classifier | Programmable multi-layer classifier with 4 QoS classes |
Standalone Capable | Standalone network switch, or in combination with a PC/104 embedded computer |
General | |
Power Input | +7 to +36V DC/DC power supply |
Power Consumption | 5.4W typical at +5VDC |
Bus Interface | Optional PC/104 (ISA) bus passthrough |
Form Factor | PC/104 (3.55" x 3.775") |
Operating Temperature | -40°C to +85°C (-40°F to +185°F) with heatspreader |
Weight | 2.4oz (68g) without heatspreader |
MTBF | tbd |
RoHS | Compliant |
| ||||
| ||||
|
|
| ||
|
|
| ||
|
|
| ||
Copyright © 1997-2012 MPI Distribution AG, a member of the HT Holding AG.
Information contained in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.