Product is not recommended for new designs.
This does NOT mean they are obsolete products.
Contact MPI for replacement information.

 

Datasheet:

Overview

The FPGA-PCI104 is a building platform that supports up to four daughter cards. Each daughter card location supports interfaces ith up to 28 I/O signals. Each daughter card location is symmetrical. Daughter cards can encompass one or more daughter card locations for greater I/O. For example, the FPDB-DEV uses all four daughter card locations and has access to 112 I/O signals.

The FPGAPCI104 is PCI-104 compliant and has a full PCI 2.3 interface.

The on-board FPGA is configured via the on-board EEPROM, ISA/PCI bus, or the JTAG port. The configuration EEPROM can be programmed, independently of the FPGA, over the PC/104 bus or the PCI-104 bus or via the ISP port.

The FPGA-PCI104 is based on the Altera's Cyclone FPGA family: 4K, 12K or 20K logic element parts. Altera's free Quartus-II basic FPGA design software can be used by the end-user to define the circuit/system functions to be implemented in the on-board FPGA.

The FPGA-PCI104 has an on-board real-time counter/clock with SuperCap backup, and a unique read-only 64-bit serial number ROM.

Included on the FPGA-PCI104 are the connectors and physical layer circuits for 10/100 Ethernet and optionally a 10/100/1000 GIGJACK port, and an I2C/SMBus. Also included are a 50 MHz oscillator, and an SMB connector for an external reference frequency source.

The FPGA-PCI104 is powered from the ISA/PCI bus, or external 6V DC to 18V DC supply. Temperature range is 0°C to 85°C.

part number	description	status
FPGA-PCI104-4K	PCI-104 compliant FPGA building platform, Altera Cyclone - 4,000 logic elements	NRND
FPGA-PCI104-12K	PCI-104 compliant FPGA building platform, Altera Cyclone - 12,000 logic elements	NRND
FPGA-PCI104-20K	PCI-104 compliant FPGA building platform, Altera Cyclone - 20,000 logic elements	NRND

accessories and options
FPDB-DEV	PC/104 sized daughtercard, uses all four daughter card connectors	NRND
FPDB-DEV1/2	Mounts on two daughter cards across the width of the board	NRND
FPDB-DEV1/4	Single daughter card size, installed on all four connectors	NRND
FPDB-GPIO24-OPTO	n/a	NRND
FPDB-IO22	Uses two daughtercard connectors and provides an OPTO22 compatible interface	NRND
FPDB-LED24	LED display card	NRND
FPDB-Multi232	Daughtercard	NRND
FPDB-Multi485	n/a	NRND
FPGA-CBL-JTAG/ISP	Programming cable	NRND
FPGA-PCI104-KIT	FPGA-PCI104 Development Kit	NRND