Hercules is a high-integration EBX format (8.00” x 5.75”), based on Pentium III , 800 MHz CPU. It provides these important benefits to the embedded systems designer:
CPU | |
Processor | VIA Mark CoreFusion CPU operating at 800MHz |
SDRAM memory | 256MB or 512MB on board |
Flash memory | 2MB |
System I/O | 4 USB 2.0, 4 USB 1.1, PS/2 keyboard / mouse |
Serial ports | 2 fixed RS-232 or RS-485 |
Max data rate | 460.8kbps all ports |
IDE connections | 1 44-pin connector for flashdisk |
Ethernet | 10/100Mbps |
Serial console | Selectable COM1 / COM2 |
Floppy Drive | USB legacy support |
Parallel Port | Not present |
PC/104 Bus Capacity | 3 modules |
PC/104+ bus | +5V/+3.3V selectable |
Data Acquisition Circuitry | |
Analog inputs | 32, 16-bit A/D resolution |
Max sample rate | 250KHz total |
Input modes | Single-ended, differential |
Input ranges | +/-10V, +/-5V, +/-2.5V, +/-1.25V, 0-10V, 0-5V, 0-2.5V, 0-1.25V |
Accuracy | < +/-2LSB after autocalibration |
Analog outputs | 4, 12-bit D/A resolution |
Settling time | 10uS to +/-.01% |
Input Impedance | 10^13 ohms |
Output current | +/-5mA max, 2kOhm min load |
Digital I/O | 40 lines, 5V logic compatible with ESD protection |
Direction | Programmable in 8-bit ports |
Output current | 0: 12mA max; 1: -4mA max |
Counter/timers | 1 24-bit A/D sample rate control |
PWM | 4 independent programmable Pulse-Width Modulation outputs |
Power supply | |
Input voltage | 5-28VDC std., 20-48VDC opt. |
Total output power | 40W total (30W, 28W or 24W spare based on board speed grade) |
Power consumption | 12W at 550MHz and 16W at 750MHz |
Output voltages | +5V, +3.3V (on PCI bus) |
Switched outputs | +5V, +12V, +3.3V |
General | |
Dimensions | 8.00" x 5.75" EBX format |
Weight | 10oz / 285g |
Operating temp. | -40 to 85ºC |
Development Kit |
A development kit is available with all the hardware you need to get started on your Hercules II embedded design project. The kit contains a Hercules II CPU board, data acquisition test board, flashdisk module, cable kit, AC power adapter, USB floppy drive, and software CD.
|
Item | DSC No. | Description |
1 | C-HRCEBX-KIT | Hercules cable kit including utility board |
2 | ACC-HRCDAQ | Hercules data acquisition demo board |
3 | FD-128-XT | 128MB IDE flashdisk module |
4 | 881001 | Flashdisk programming module |
5 | 891001 | USB floppy drive |
6 | PS-12V-01 | AC adapter, 100-240VAC in, 12VDC out |
7 | MTG104 | PC/104 mounting hardware kit |
8 | 671001 | Diamond Systems CD with |
Hercules Cable Kit |
The Hercules cable kit includes cables for all Hercules and Hercules II I/O except LCD data and backlight, which are included in the LCD kit. A cable kit is strongly recommended for first-time buyers, as many cables are non-standard. All cables are also available individually. Once you know which cables your application requires, you can save money on future orders by purchasing only the ones you need.
|
Item | Qty | Part No. | Description |
1 | 1 | 698002 | Ethernet cable |
2 | 1 | 698022 | Dual-port PS/2 cable |
3 | 1 | 698025 | Audio I/O cable |
4 | 1 | 698017 | TV output cable |
5 | 1 | 698018 | Speaker output cable |
6 | 1 | 698024 | VGA output cable |
7 | 1 | C-20-18 | 20-conductor ribbon cable |
8 | 1 | C-40-18 | 40-conductor ribbon cable |
9 | 1 | C-50-18 | 50-conductor ribbon cable |
10 | 1 | C-DB9M-4 | 4-port serial port cable |
11 | 1 | 698026 | 40-conductor UDMA-100 IDE cable |
12 | 1 | 698004 | 44-conductor IDE cable |
13 | 1 | 698015 | Power input cable, 10 conductors |
14 | 1 | 698016 | High-power input cable, 2 conductors |
15 | 1 | 698011 | External battery cable |
16 | 1 | 698006 | Output power cable |
17 | 2 | 698012 | Dual-port USB cable |
18 | 1 | 861002 | Utility features assembly |
Copyright © 1997-2012 MPI Distribution AG, a member of the HT Holding AG.
Information contained in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.