Test + Measurement, Power Solution
AC Power Supplies, DC Sources, Electronic AC and DC Loads, High Voltage Power Supplies, Inverter.
AC Sources, 250 VA to 150 KVA
- EAC AC Power Source
Our motor-driven sources are used in all places where a high performance is required and they offer a markedly cost-effective solution for such high-performance applications.
The electronically generated and stabilized voltage of our AC sources is galvanically separated from the input and can be set from zero to maximum voltage. As with all device families of ET System electronic GmbH, the AC sources are either built as laboratory units or as ATE versions for automated test systems in 19 inch cases.
Analogue interfaces as well as IEEE 488, RS-232/485, USB and LAN are available to control our devices. With the IEEE interface, drivers for the Lab View user interface can also be used.
Matured technologies, ongoing adaptation to the latest requirements and a comprehensive range of options, guarantee a smooth integration into all applications.
EAC-3S-750 - 30000 VA: 3 phase Electronic AC power sources
EAC-SP-250-12.000 VA: Single phase Electronic AC Power Sources,
EAC-3SP 750 - 36000 VA: Flexible modular 3 phase Electronic QAC Sources,
EAC 250 - 10.000 VA: Single phase Electronic AC Power Sources
EAC/3P 750 - 30.000 VA: Flexible modular 3 phase Electronic systems
EAC-I 500 - 3000 VA: Compact Size and Light Weight by switch mode design
EAC/MT/SL 500 - 1000 VA: Motor driven source with leakage current measurement,
EAC/MT 1 & 3 phase up to 150 kVA: 3 phase, high power motor driven AC power sources,
EAC/P 1350 – 2000: 1350 – 2000 VA primary switcher,
EAC/BL 1350VA: special option for motor testing,
EAC/HP 1000 – 20000 VA: 1-3 phase high power source,
EAC/BL Plus 30 kVA – 120 kVA: 1-3 phase high power source,
EAC/ACM/ACP 250VA – 9 kVA: 1-3 phase high power source linear regulatet
DC Sources, LAB Power Supplies, 100 W to 1 MW
- LAB SP DC Source
Our company provides you with a very broad product range of programmable and manually operated DC laboratory power supplies. The comprehensive platform offering is complemented by diverse options and can at any time be extended by customized adaptations. In addition to analogous interfaces, our devices can also be controlled by IEEE, RS-232/485, USB or LAN. We offer you switch-mode as well as linear supplies certainly addressing all requirements with their 120-watt power spectrum. Should, however, this broad performance range fail to meet customers’ expectations at any point, we shall develop a customized solution in the shortest time.
LAB/SL, Linear Laboratory DC Sources with free built in Electronic Load, 120-240 W,
LAB/SLR, As the LAB/SL but with automatic ranging, 120-240 W,
LAB/EC, Desktop linear power supplies with up to three outputs, 90 to 600 W,
LAB/LC, 300 - 600 W,
LAB/SP, Primary switched laboratory PSU's 500 - 2000 W,
LAB/SM, 0,5 -2kW Switch Mode DC Power Supplies with excellent specification,
LAB/SMP, 1,2 - 2,4 KW, Compact design, Storable space for freely programmable U/I Curves,
LAB/SMS, 3 - 10KW,
LAB/HP5, 5-120 kW High Power, compact,
LAB/S, Linear DC power supplies from 500 to 4500W,
LAB/ACO/IGBT, High power DC sources up to 60kW,
LAB/ACO, High power DC sources up to 1000kW,
Electronic DC Loads, 100W to 50kW
- ELP/SLM Electronic Load, 1kW to 10 kW
For operation via computer an IEEE 488.2, RS-232/485, USB or LAN interface can be built in enabling remote control and systems integration. The devices allow constant current and constant resistance operation. The test parameters can be preset and the Dynamic option additionally enables constant voltage and constant power operation.
The Dynamic function offers a range of different wave forms and allows for changing the frequency in addition to setting current rise times. Our electronic loads are used in many applications including burn-in of new devices, precise power supply stress tests, battery and DC source tests or photovoltaic element manufacturing. If our standard loads offering should not meet your requirements, we shall procure a fast and low-cost custom solution.
Product Selection:
ELP/SL: 100W-800W DC Loads with Interface and Dynamic Options,
ELP/SLM: 1.000-50.000 Watt 1kW-15kW DC Loads with Interface and Dynamic Options,
ELP/DCM: 150-300 W DC load,
ELP/DCM: 600 – 1200 W DC load,
ELP/DCM: 1800– 3600 W DC Load,
ELP/DCM: 6000– 15000 W DC Load,
ELP/DCM: 20– 100 kW DC Load,
ELP/DCM: 200 kW DC Load,
ELP/BFC: 2000, 2 kW DC Load with AC Power Recycling,
ELP/DCA: 3 – 250+ kW Air-cooled programmable electronic load,
ELP/DCW: 60 W – 250+ kW Water-cooled programmable electronic load.
Electronic AC Loads, 300 to 15000 Watt
- AC Load
Our electronic AC loads family covers a wide range of different voltage, current and power scales. They are used as table laboratory instruments. Alternatively, they are also available in a 19-inch rack mount version for use in automatic test and burn-in systems. An IEEE 488.2, RS-232/485, USB or LAN interface can be attached for computer-based control enabling remote control and systems integration. The devices allow constant current and constant resistance operation and also test parameters can be preset. Our electronic AC loads are used in many applications including testing of AC sources, transformers, UPS (Uninterruptible Power Supply), and inverters. Should our standard loads offering not meet your requirements, we shall procure a fast and low-cost custom solution.
ELP/AC/DCM 300 W:
AC load and racks with interface,
ELP/AC Mainframe (300 W Mainframe 3302C)
Mainframes for ELP/AC/DCM with interface,
ELP/AC mainframes 1200 W, Mainframe 3300
Mainframes for ELP/AC/DCM with interface
ELP/AC mainframes, (1200 W Mainframe 3301A)
Mainframes for ELP/AC/DCM with interface
ELP/AC3256/3256E 1200 - 1800 W,
AC load with interface
ELP/AC3254/3255 1200 - 1800 W,
AC load with interface
ELP/ACR3700 3600 - 15000 W,
AC Last in High Power range
High Voltage Laboratory Power Supplies up to 30kV
- LAB SHQ, High voltage laboratory power supplies
Our standard range of HV supplies covers a very broad range of output voltages and case formats, thus ensuring that the devices can be fitted for almost any application. Requirements not complying with the standard are realized through modification and we develop customized devices on request. The wide range of variants opens up an almost universal application area for our HV supplies such as magnetron and laser applications, x-ray tube supply or acceleration systems.
Product Range:
APS/BPS 0,6 - 3 W:
High voltage PCB mountable modules - 3000 VDC,
CPS/EPS 12 - 60 W:
High voltage module up to 30kV,
DPS 12 W:
Precisions high voltage module up to 7000 V,
GPS/HP 0,3 - 3 kW:
High voltage power supplies up to 30 kV,
SHQ 6 - 12 W:
High voltage power supplies up to 6 kV multi channel,
EHQ 12 W:
HV - Module in 3 HE - Euro-cassette up to 4 kV,
NHQ 12 W:
High voltage module in NIM up to 6 kV multi channel,
CHQ 12 W:
High voltage module in CAMAC up to 12 kV multi channel,
VHQ 6 W:
High voltage module in VEM up to 5 kV multi channel,
EHQ 8006-F/8 10W:
Multi channel - high voltage - System 8 Channels per 600 V/1,2 W,
EHQ F XXX/16 4W:
Channel high voltage module 16 Channels up to 1 kV/0,2-5 W,
EHQ 20 XXX/32 4W:
Channel high voltage module up to 32 Channels up to per 2,5 kV/50mA.
Inverters, DC/AC, 100VA to 50 kVA
- DC/AC Inverter, up to 3500VA
Our inverters are available as stand-alone units or in a 19-inch rack for cabinet mounting and systems integration. As with all products of ET System electronic GmbH, different case shapes and sizes are obtainable on request. In addition to our standard switch-mode designs we also offer linear inverters for critical applications. The linear design benefits from extremely low interference making them the ideal choice for sensitive applications such as radio and television transmitter systems. We can realize, according to your statement, customized inverters for each requested specification that go beyond our basic product line.
Product Range:
TC 150 VA - 1000 VA:
Switch mode built in sine wave inverter up to 700 VA,
TC 1300 - 3500 VA:
Switch mode built in sine wave inverter up to 3500 VA,
INV 500 - 10000 VA:
19" rack mounted switch mode sine wave inverter up to 4000 VA,
INV/SYS 1 - 48 kVA:
19" rack mounted switch mode sine wave inverter up to 48 KVA,
INV/I 1 - 180 kVA:
High power one and three phase output sine wave inverters 1-180 KVA.
Copyright © 1997-2013 MPI Distribution AG, a member of the HT Holding AG.
Information contained in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.